Yocan Evolve Plus Concentrate Vaporizer Manual

Preparing the Yocan Evolve Plus Vaporizer

  1. Charge your Yocan Evolve Plus Vaporizer before use to ensure best results.
  2. Once you have fully charged the battery, you can proceed by turning the vaporizer battery on by tapping the power button 5 times. Note: The power button is located at the middle part of the battery facing outwards and is the rectangularly shaped button on the vaporizer battery.
  3. Once the Yocan Evolve Plus Vaporizer is powered on you can begin sterilizing the coils by pressing and holding the power button for 5 seconds two or three times. Note: perform sterilization during the first time you receive your Yocan Evolve Plus Vaporizer. This will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process.
  4. After sterilization, let the vaporizer sit and rest for about 2 – 3 minutes. After so, you can begin loading your select concentrates onto your Yocan Evolve Plus Vaporizer.

Loading the Yocan Evolve Plus Vaporizer

  1. Remove the integrated concentrate container located at the bottom of the Yocan Evolve Plus Vaporizer. At the same time, make sure to prepare your dab tool so you can scoop your concentrates from the built-in concentrate container.
  2. Make sure you’ve sanitized your Yocan Evolve Plus Vaporizer first especially if it’s the first time you’re using it. Note: Follow steps for preparing the Yocan Evolve Plus Vaporizer.
  3. Twist the mouthpiece counterclockwise to expose the Yocan Quartz Dual Coils (QDC).
  4. Remove the coil cap by twisting it counter clockwise. Removing the mouthpiece exposes the coils that are covered with the coil cap.
  5. Load desired amount of concentrate onto the coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop the QDC.
  6. Replace the coil cap by turning it clockwise.
  7. Replace the mouthpiece by twisting it clockwise to safely assemble the Yocan Evolve Plus Vaporizer. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.

Vaping with the Yocan Evolve Plus Vaporizer

  1. Make sure that the Yocan Evolve Plus Vaporizer is properly charged, properly sterilized, and is loaded with concentrates before you start vaping.
  2. After the Yocan Evolve Plus Vaporizer is loaded, press your lips against the mouthpiece and prepare to pull.
  3. Press and hold the power button. When the Yocan Evolve Plus Vaporizer begins generating vapors start to inhale and draw from the mouthpiece.
  4. Repeat this process as necessary or as the concentrates are fully consumed.

Care and Maintenance of the Yocan Evolve Plus Vaporizer

The Yocan Evolve Plus Vaporizer is easy to clean and maintain. Likewise, it has very few parts which means that assembly and disassembly is fairly easy as well. To maintain your Yocan Evolve Plus Vaporizer, follow the steps below.

  1. Power the vaporizer on. Five clicks of the button will power it on and five clicks power it off.
  2. Turn the Yocan Evolve Plus Vaporizer upside down.
  3. Execute a burn-off by pressing and holding the power button for 5 seconds. Repeat this process 2 – 3 times. The burn-off will cause any residue to melt or evaporate making the cleaning process easy.
  4. Allow the vaporizer to cool down.
  5. Disassemble the Yocan Evolve Plus Vaporizer by twisting the threaded connections counter clockwise.
  6. Rub off any liquid residue on the vaporizer and its parts with a dry paper towel and reassemble.

CLICK HERE to return to the Yocan Evolve Plus product listing.